BIOS 請重置為原廠值，再試試Q441 能否連上--->還是無法連上!
安裝Q441，訊息如下：請查看有沒有問題?
Install Kernel Q441-6.12.12-12...
Install Kernel Q441-6.12.12-12...
--2025-04-12 14:51:07-- https://raw.githubusercontent.com/sa...64.pkg.tar.zst
Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt'
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.109.133, 185.199.108.133, 185.199.110.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 10535197 (10M) [application/octet-stream]
Saving to: ‘/tmp/linux-Q441-6.12.12-12-x86_64.pkg.tar.zst’


linux-Q441-6.12.12-12-x86_64. 100%[=================================================>] 10.05M 3.05MB/s in 3.5s


2025-04-12 14:51:12 (2.84 MB/s) - ‘/tmp/linux-Q441-6.12.12-12-x86_64.pkg.tar.zst’ saved [10535197/10535197]


loading packages...
resolving dependencies...
looking for conflicting packages...


Packages (1) linux-Q441-6.12.12-12


Total Installed Size: 26.87 MiB
Net Upgrade Size: 15.73 MiB


:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [########################################] 100%
(1/1) checking package integrity [########################################] 100%
(1/1) loading package files [########################################] 100%
(1/1) checking for file conflicts [########################################] 100%
(1/1) checking available disk space [########################################] 100%
:: Running pre-transaction hooks...
(1/1) Removing linux initcpios...
:: Processing package changes...
(1/1) upgrading linux-Q441 [########################################] 100%
:: Running post-transaction hooks...
(1/3) Arming ConditionNeedsUpdate...
(2/3) Updating module dependencies...
(3/3) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux-Q441.preset: 'default'
-> -k /boot/vmlinuz-linux-Q441 -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-Q441.img --microcode /boot/intel-ucode.img
==> Starting build: '6.12.12-12-Q441'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [kms]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas'
==> ERROR: module not found: 'usbhid'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-Q441.img'
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux-Q441.preset: 'fallback'
-> -k /boot/vmlinuz-linux-Q441 -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-Q441-fallback.img -S autodetect --microcode /boot/intel-ucode.img
==> Starting build: '6.12.12-12-Q441'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [kms]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas'
==> ERROR: module not found: 'usbhid'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-Q441-fallback.img'
==> WARNING: errors were encountered during the build. The image may not be complete.
error: command failed to execute correctly
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux-Q441
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-Q441.img
Found linux image: /boot/vmlinuz-linux-Q352WU
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-Q352WU.img
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux.img
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create new boot entries.
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
Adding boot menu entry for UEFI Firmware Settings ...
done
[ll@ArchQ:Q352WU ~]$