lsmod結果跟我的Z790 Q352WU 開機是一樣的。我真的看不出網卡不能用的原因是什麼。 1. Cuhulong兄電腦上插了幾支ssd ? 2. 執行一次，會要密碼，但不會顯示什麼。完成後用Q441開機。 代碼: sudo sed -i '$ itouch /root/$(uname -r)' /etc/rc.local 3.Q352WU開機， sudo ls /root 結果貼出來，小弟確認一下Q441 是否完成開機。
sudo sed -i '$ itouch /root/$(uname -r)' /etc/rc.local
1. 電腦上插了幾支ssd ?--->一盒兩隻 Klevv DDR5-6400 16G !但是controlled 0 disabled! BOLT5 V.jpg controller 0 disabled.jpg 剛剛拔掉靠內側CPU那一隻，Q441也是無法連線! 2. [ll@ArchQ:Q352WU ~]$ sudo sed -i '$ itouch /root/$(uname -r)' /etc/rc.local [sudo] password for ll: [ll@ArchQ:Q352WU ~]$ reboot 完成後用Q441開機。Connection to 192.168.1.20 closed by remote host. Connection to 192.168.1.20 closed. PS C:\Users\ll> ssh [email protected] ssh: connect to host 192.168.1.20 port 22: Connection timed out PS C:\Users\ll> ssh [email protected] ssh: connect to host 192.168.1.20 port 22: Connection timed out 3. Q352WU開機 PS C:\Users\ll> ssh [email protected] [email protected]'s password: [ll@ArchQ:Q352WU ~]$ sudo ls /root [sudo] password for ll: 6.12.12-12-Q352WU [ll@ArchQ:Q352WU ~]$
結論是 Q441 沒有開機成功，不是網卡問題。 BIOS 請重置為原廠值，再試試Q441 能否連上，一樣 sudo ls /root，看結果。
BIOS 請重置為原廠值，再試試Q441 能否連上--->還是無法連上! 安裝Q441，訊息如下：請查看有沒有問題? Install Kernel Q441-6.12.12-12... Install Kernel Q441-6.12.12-12... --2025-04-12 14:51:07-- https://raw.githubusercontent.com/sa...64.pkg.tar.zst Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt' Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.109.133, 185.199.108.133, 185.199.110.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 10535197 (10M) [application/octet-stream] Saving to: ‘/tmp/linux-Q441-6.12.12-12-x86_64.pkg.tar.zst’ linux-Q441-6.12.12-12-x86_64. 100%[=================================================>] 10.05M 3.05MB/s in 3.5s 2025-04-12 14:51:12 (2.84 MB/s) - ‘/tmp/linux-Q441-6.12.12-12-x86_64.pkg.tar.zst’ saved [10535197/10535197] loading packages... resolving dependencies... looking for conflicting packages... Packages (1) linux-Q441-6.12.12-12 Total Installed Size: 26.87 MiB Net Upgrade Size: 15.73 MiB :: Proceed with installation? [Y/n] (1/1) checking keys in keyring [########################################] 100% (1/1) checking package integrity [########################################] 100% (1/1) loading package files [########################################] 100% (1/1) checking for file conflicts [########################################] 100% (1/1) checking available disk space [########################################] 100% :: Running pre-transaction hooks... (1/1) Removing linux initcpios... :: Processing package changes... (1/1) upgrading linux-Q441 [########################################] 100% :: Running post-transaction hooks... (1/3) Arming ConditionNeedsUpdate... (2/3) Updating module dependencies... (3/3) Updating linux initcpios... ==> Building image from preset: /etc/mkinitcpio.d/linux-Q441.preset: 'default' -> -k /boot/vmlinuz-linux-Q441 -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-Q441.img --microcode /boot/intel-ucode.img ==> Starting build: '6.12.12-12-Q441' -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [kms] -> Running build hook: [keyboard] ==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas' ==> ERROR: module not found: 'usbhid' -> Running build hook: [keymap] -> Running build hook: [consolefont] ==> WARNING: consolefont: no font found in configuration -> Running build hook: [block] -> Running build hook: [filesystems] -> Running build hook: [fsck] ==> Generating module dependencies ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-Q441.img' ==> WARNING: errors were encountered during the build. The image may not be complete. ==> Building image from preset: /etc/mkinitcpio.d/linux-Q441.preset: 'fallback' -> -k /boot/vmlinuz-linux-Q441 -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-Q441-fallback.img -S autodetect --microcode /boot/intel-ucode.img ==> Starting build: '6.12.12-12-Q441' -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [kms] -> Running build hook: [keyboard] ==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas' ==> ERROR: module not found: 'usbhid' -> Running build hook: [keymap] -> Running build hook: [consolefont] ==> WARNING: consolefont: no font found in configuration -> Running build hook: [block] -> Running build hook: [filesystems] -> Running build hook: [fsck] ==> Generating module dependencies ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-Q441-fallback.img' ==> WARNING: errors were encountered during the build. The image may not be complete. error: command failed to execute correctly Generating grub configuration file ... Found linux image: /boot/vmlinuz-linux-Q441 Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-Q441.img Found linux image: /boot/vmlinuz-linux-Q352WU Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-Q352WU.img Found linux image: /boot/vmlinuz-linux Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux.img Warning: os-prober will be executed to detect other bootable partitions. Its output will be used to detect bootable binaries on them and create new boot entries. logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused logger: socket /dev/log: Connection refused Adding boot menu entry for UEFI Firmware Settings ... done [ll@ArchQ:Q352WU ~]$
這個Q441 安裝沒問題。 我製作新的Qdbug-6.12.126，config -> kernel -> install 安裝試試，看看能不能本機登入使用。 先移除不能使用的kernel Q441, Q396 ....，清出一些空間。
對了。Q441開機時，可能有時不成功，看網卡的橘黃燈是否有亮。 若沒亮，關電源後，再試一次。通常重開一至二次就會成功。 若一直一樣，那真的有問題，我也想不出原因。
1.Q441開機時，都不成功，看網卡是亮綠燈。 2.Q352WU、Qdbug-6.12.12開機時，都成功，看網卡亮橙黃燈。 3.Qdbug-6.12.12 ArchQ login：可以本機登入使用!後續如何使用? 4.不知有哪位先進跟我一樣是ASUS ROG B760-I 的板子，如果安裝Q441開機時，並成功連線，請告知!那表示是我的主機板子有問題要報修!
作者: cuhulong 3.Qdbug-6.12.12 ArchQ login：可以本機登入使用!後續如何使用? 麻煩再確認一個kernel ，Qrip-6.12.12，本機是無法登入，只能遠端登入，看它是否可用。 Qrip 與 Q441 的差異，只有工作頻率。 若Qrip 正常，試試 Q44-6.12.12，若Q44也不行，小弟猜想可能是BIOS 要調成 沒有鍵盤時，也能開機的狀態。 Boot (Menu) -> Boot configure -> Setup Mode -> Advenced Mode 調成這個試試，我不確定。 Qdbug 可以移除了，小弟只是用來判斷失敗的可能性。
1.Qrip-6.12.12，Q44-6.12.12，都不行無法遠端登入!看網卡是亮綠燈。 2.BIOS 要調成 沒有鍵盤時，也能開機的狀態--->不知如何設定? 3.Boot (Menu) -> Boot configure -> Setup Mode -> Advenced Mode 調成這個試試--->設定了!只是BIOS畫面是Advenced Mode! boot 畫面.jpg 找不到沒有鍵盤時，也能開機的狀態?
此篇文章於 2025-04-12 11:03 PM 被 cuhulong 編輯。
作者: cuhulong 2.BIOS 要調成 沒有鍵盤時，也能開機的狀態--->不知如何設定? 我也不知道，問AI 看看，先試試 鍵盤拔掉後，能不能開機進Q352WU。 若仍能正常開機，就要另查原因了，八成是BIOS 調整問題。 Q441, Q44, Qrip 等，都是無法在本機操作的版本，在你這裡都無法開機成功。 換去年的BIOS 試試。
討論區規則
回覆時引用此篇文章
作者: cuhulong
