https://audiophilestyle.com/forums/t...ram-in-2-hourshttps://audiophilestyle.com/forums/t...comment-982717The discovery of putting a specific Intel NUC computer into the stereo system as the network endpoint running Audiolinux (AL) in RAM with no other disks has dramatically improved the audio quality for many of us.https://audiophilestyle.com/forums/t...comment-908119I've been trying it out for a couple of days, and my results so far have been promising. Just like in AL, enabling ramroot (loading the root partition into a RAM disk, and then booting from it) results in a definite uptick in sound quality.https://audiophilestyle.com/forums/t...omment-1087979All works well and booting into RAM is a clear step up in SQ!早期的 Mac Mini 型號（2012 就是尾班車）仍然可以升級到 16GB RAM 或以上，而 tetsuka 兄的 NUC7PJYH 也可以達到 8 + 8 = 16GB RAM，不用理會官方的 Celeron J4005 規格：I am at around 200 gb right now and with a Roon DB of about 350 mb, I managed by re-allocating my 8Gb RAM to get what looks like a stable Ramroot Roon server (will still do a long session tonight to test) on my server. In Ramroot AL sounds fantastic in my setup increasing the depth of the sound. Further Redbook sounds now great, while with my previous SW setup I resorted to DSD oversampling in Roon to try and get more flesh out of some redbook albums. I feel I do not need the oversampling now.
https://audiophilestyle.com/forums/t...comment-865428
https://audiophilestyle.com/forums/t...comment-900368Yes NUC7PJYH works with 16gb RAM
https://github.com/arcmags/ramrootAUR (en) - ramrootRun Linux entirely from RAM! This is customizable mkinitcpio hook that completely loads the root file system to a zram partition during the initramfs boot stage.
https://aur.archlinux.org/packages/ramroot/
Ramroot – Run Arch Linux Entirely From RAM!
https://ostechnix.com/ramroot-run-ar...-entirely-ram/
ramroot : 把root分區裝載到內存 -- 簡介
https://bbs.archlinuxcn.org/viewtopic.php?id=11334
討論 RAMRoot 的效能 (適用於 Roon Server) #102 測試碟
https://www.hiendy.com/hififorum/for...ead&tid=125048
http://www.headphoneclub.com/forum.p...e=2#pid5427915其實 sam0402 兄打包的時候只需把單一檔案的大小控制在 20MB 以下就可以兼顧對岸的樂友了，沒有 ladders 也可以直接下載 GitHub 的檔案：(可能需要自備梯子)
https://cdn.jsdelivr.net/gh/sam0402/...ch install.txt
https://cdn.jsdelivr.net/gh/sam0402/...64.pkg.tar.zst
https://cdn.jsdelivr.net/gh/sam0402/...64.pkg.tar.zst
https://cdn.jsdelivr.net/gh/sam0402/...64.pkg.tar.zst
https://cdn.jsdelivr.net/gh/sam0402/...64.pkg.tar.zst
https://cdn.jsdelivr.net/gh/sam0402/..._64.pkg.tar.xz
https://cdn.jsdelivr.net/gh/sam0402/....pkg.tar.xz.aa
https://cdn.jsdelivr.net/gh/sam0402/....pkg.tar.xz.ab
https://cdn.jsdelivr.net/gh/sam0402/....pkg.tar.xz.ac
https://cdn.jsdelivr.net/gh/sam0402/....pkg.tar.xz.ad
剛好超過 20MB 的 LMS 就是醬子的說：File size exceeded the configured limit of 20 MB.
回覆時引用此篇文章