-
 Wilson Benesch unveils 25th anniversary Circle 25 turntable
Wilson Benesch unveils 25th anniversary Circle 25 turntable
Wilson Benesch發表25周年紀念黑膠轉盤 "Circle 25 Turntable"，售價約為1750英鎊，搭配ACT 05唱臂售價則為3345英鎊。其引用過去在1989年推出的Analogue Collection的經典圓形轉盤設計，並有一個25周年的銘牌。
照片中為白色，另外也將提供黑色版本。轉盤的底座是由Delrin製成，一種高質量的聚合物，增加了兩公斤的重量和優良的阻尼特性。
http://wilson-benesch.com/
-
-
撿日不如撞日。這句俗語用在去舊貨店找二手唱片真是再貼切不過了。昨晚，送女兒去管弦樂團團練，順便繞去附近的Goodwill看看最近又有什麼新到的二手唱片。一個半小時之後，抱了50張唱片出來。
這是其中的幾張
顯然，最近有位披頭四迷捐了不少唱片 運氣不錯，我大概翻了一個鐘頭後，旁邊來了另一位先生，也開始一疊一疊唱片在那翻。上次去也有競爭者。看來，這一帶聽唱片的人還不少。喔！一張唱片1.59美元再加6%的稅。昨晚買一整疊，大概還不夠在ebay上買一張稍微搶手些的唱片
-
The Following 2 Users Say Thank You to kevintran For This Useful Post:
-
-
-
Thales發表新唱臂"EASY"
Thales發表新唱臂"EASY"
瑞士的Thales設計了一款新的高性能唱臂，而且價格非常具有競爭力，C/P值很高的"EASY"，Thales認為消費者將可在這個價格得到過去不可能得到的音樂體驗。
The clever arrangement of six bearing points creates three null points for the horizontal tracking error, plus a zero point for the variable offset angle as well, which is a really novel for a tonearm design.
意味唱頭有一個良好的跟蹤引導，大幅減少側向力，使得資訊的讀取更清楚。
Spindle to Pivot 230mm (EMT/Ortofon standard)
Effective length: 220mm
Effective mass: 10gm
Max. tracking error: ±0,4° (trad. 9“ tonearm: 2,2°)
Max. offset angle: ±12° (trad. 9“ tonearm: 23°)
Cartridge weight 5g – 20g
Output connection 5-pin-DIN (integrated)
http://www.tonarm.ch/
-
The Following 6 Users Say Thank You to Ted Chen For This Useful Post:
-
Abis SA-1, TA-1 Tonearm
http://www.sibatech.co.jp/abis/tonearm.html
SA-1
* The major key to tonearm quality is the sensitivity and stability in retrieving delicate signals, for which the bearings are the determining factor. The SA-1 employs miniature radial bearings for both horizontal and vertical movement. Very high performance is achieved at a reasonable price.
* The rectangular arm-wand is machined from a solid aluminum block having an advantage in rich and tight bass reproduction, as bass sound is mainly recorded in the horizontal plane of the groove.
* Tonearm wires run through separate aluminum tubes inside the arm so that stereo separation is maximized.
* Reproduced sound is precise and clean, thanks to hand assembly by highly skilled craftsmen.
* Comes with detachable headshell, phono cable (RCA output plug, or optionally as XLR), screws, washers, wrench and marking pin.
| Specifications |
| Length: |
310mm |
| Spindle center to arm pivot distance: |
212mm |
| Stylus to pivot distance: |
228mm |
| Overhang: |
16mm |
| Cartridge weight: |
15-45 grams, including headshell |
| Net weight: |
745g (with headshell attached: 762g) |
TA-1
* The major key to tonearm quality is the sensitivity and stability in retrieving delicate signals, for which the bearings are the determining factor. The TA-1 employs a miniature radial bearing for horizontal movement and a miniature pivot bearing for vertical movement. Very high performance is achieved at a reasonable price.
* The body is constructed from a machine-tooled solid aluminum block.
* The hand-assembled arm wand satisfies every vital condition necessary for vibration-free and noise-free reproduction.
* Reproduced sound is precise and clean, thanks to hand assembly by highly skilled craftsmen.
* Comes with detachable headshell, phono cable (RCA output plug, or optionally as XLR), screws, washers, wrench and marking pin.
| Specifications |
| Length: |
305mm |
| Spindle center to arm pivot distance: |
216mm |
| Stylus to pivot distance: |
232mm |
| Overhang: |
16mm |
| Cartridge weight: |
15-29 grams, including headshell |
| Net weight: |
580g (with headshell attached: 597g) |
-
-
Ikeda 9TS, SAI MC唱頭
Ikeda 9TS
與9系列的聲音特色一樣，不過0.35mVrms的輸出比9TT高出一倍，比較容易搭配，價格也稍低(USD 2,800)
Tonally it has the same musicality as the other MC cartridges in the "9"-family. No compromises are made also during processing. The 9TS 0, 35mV is about twice as high output voltage compared to the 9TT so that it can be operated without any problems on cheaper phono preamps.
Output Voltage: 0.35mVrms (1kHz 35.4mm/sec., at 45°peak)
Coil Impedance: 6.0 ohms (1kHz)
Appropriate Stylus Force: 2.0grams ±0.2 grams
Frequency Response: 10Hz ～ 45kHz
Channel Separation: over 27dB (1kHz)
Channel Balance: within 1.0dB (1kHz)
Stylus Chip: Oval-shaped solid Diamond
Cantilever: Double layered duralumin pipe.
Weight: 10 grams
Compliance: 7 x 10-6cm/dyne
Ikeda SAI
來自傳奇的9MUSAM，全新毫不妥協的設計，輸出較原來增加，為0.3 mVrms
The "SAI", is the uncompromising advancement of the legendary "9MUSAM" with completely brand new pickup system. Engineers from IKEDA succeeded to transfer the tonal qualities of the 9MUSAM without compromising. The output voltage could be increased through further development in the area of the coil drive to 0, a channel equal 0, 5dB 30mV! The cantilever consists of "Boron" and the diamond is "Micro-Ridge."
MC cartridge: Universal type dedicated to tonearm.
Output Voltage: 0.3 mVrms (1kHz 35.4mm/sec., at 45°peak)
Coil Impedance: 2.5 ohms (1kHz)
Appropriate Stylus Force: 2.0grams ±0.2 grams
Frequency Response: 10Hz ～ 45kHz
Channel Separation: over 30dB (1kHz)
Channel Balance: within 0.5dB (1kHz)
Stylus Chip: Micro-ridge solid Diamond
Cantilever: made of Boron.
Weight: 30 grams
Compliance: 7 x 10-6cm/dyne
-
The Following 2 Users Say Thank You to Leo Yeh For This Useful Post:
-
SAI的發音念"賽"."塞".但也可以台語發音叫"@#$%&"....昏倒!!
StevenCheng將軍
-
The Following User Says Thank You to 將軍 For This Useful Post:
-
來一顆High End的SAI吧~~~~~~~~~~~~
-
The Following User Says Thank You to Leo Yeh For This Useful Post:
-
請問站長及先進，
FR唱臂你會推薦什麼品牌唱頭？
池田是否比光悅較好搭配？敬請指教。
感謝。
-
-
 作者: BBWW
請問站長及先進，
FR唱臂你會推薦什麼品牌唱頭？
池田是否比光悅較好搭配？敬請指教。
感謝。
1.重質量的唱頭,優先為FR7,其次是IKEDA,最後是Ortofon SPU系列.
2.沒有誰比較好的問題,是口味是否合乎你的問題!!
StevenCheng將軍
-
The Following 2 Users Say Thank You to 將軍 For This Useful Post:
發文規則
- 您不可以發表新主題
- 您不可以發表回覆
- 您不可以上傳附件
- 您不可以編輯自己的文章
-
討論區規則
|
回覆時引用此篇文章
