ArchQ 數位訊源入門 -> 究極

lsmod結果跟我的Z790 Q352WU 開機是一樣的。我真的看不出網卡不能用的原因是什麼。

1. Cuhulong兄電腦上插了幾支ssd ?

2. 執行一次，會要密碼，但不會顯示什麼。完成後用Q441開機。

代碼:

---

sudo sed -i '$ itouch /root/$(uname -r)' /etc/rc.local

---

3.Q352WU開機，
sudo ls /root
結果貼出來，小弟確認一下Q441 是否完成開機。

1.
電腦上插了幾支ssd ?--->一盒兩隻 Klevv DDR5-6400 16G !但是controlled 0 disabled!
附件 35044
附件 35045
剛剛拔掉靠內側CPU那一隻，Q441也是無法連線!
2.
[ll@ArchQ:Q352WU ~]$ sudo sed -i '$ itouch /root/$(uname -r)' /etc/rc.local
[sudo] password for ll:
[ll@ArchQ:Q352WU ~]$ reboot


完成後用Q441開機。Connection to 192.168.1.20 closed by remote host.
Connection to 192.168.1.20 closed.
PS C:\Users\ll> ssh [email protected]
ssh: connect to host 192.168.1.20 port 22: Connection timed out
PS C:\Users\ll> ssh [email protected]
ssh: connect to host 192.168.1.20 port 22: Connection timed out
3.
Q352WU開機
PS C:\Users\ll> ssh [email protected]
[email protected]'s password:
[ll@ArchQ:Q352WU ~]$ sudo ls /root
[sudo] password for ll:
6.12.12-12-Q352WU
[ll@ArchQ:Q352WU ~]$

結論是 Q441 沒有開機成功，不是網卡問題。
BIOS 請重置為原廠值，再試試Q441 能否連上，一樣 sudo ls /root，看結果。

BIOS 請重置為原廠值，再試試Q441 能否連上--->還是無法連上!
安裝Q441，訊息如下：請查看有沒有問題?
Install Kernel Q441-6.12.12-12...
Install Kernel Q441-6.12.12-12...
--2025-04-12 14:51:07-- https://raw.githubusercontent.com/sa...64.pkg.tar.zst
Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt'
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.109.133, 185.199.108.133, 185.199.110.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 10535197 (10M) [application/octet-stream]
Saving to: ‘/tmp/linux-Q441-6.12.12-12-x86_64.pkg.tar.zst’


linux-Q441-6.12.12-12-x86_64. 100%[=================================================>] 10.05M 3.05MB/s in 3.5s


2025-04-12 14:51:12 (2.84 MB/s) - ‘/tmp/linux-Q441-6.12.12-12-x86_64.pkg.tar.zst’ saved [10535197/10535197]


loading packages...
resolving dependencies...
looking for conflicting packages...


Packages (1) linux-Q441-6.12.12-12


Total Installed Size: 26.87 MiB
Net Upgrade Size: 15.73 MiB


:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [########################################] 100%
(1/1) checking package integrity [########################################] 100%
(1/1) loading package files [########################################] 100%
(1/1) checking for file conflicts [########################################] 100%
(1/1) checking available disk space [########################################] 100%
:: Running pre-transaction hooks...
(1/1) Removing linux initcpios...
:: Processing package changes...
(1/1) upgrading linux-Q441 [########################################] 100%
:: Running post-transaction hooks...
(1/3) Arming ConditionNeedsUpdate...
(2/3) Updating module dependencies...
(3/3) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux-Q441.preset: 'default'
-> -k /boot/vmlinuz-linux-Q441 -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-Q441.img --microcode /boot/intel-ucode.img
==> Starting build: '6.12.12-12-Q441'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [kms]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas'
==> ERROR: module not found: 'usbhid'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-Q441.img'
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux-Q441.preset: 'fallback'
-> -k /boot/vmlinuz-linux-Q441 -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-Q441-fallback.img -S autodetect --microcode /boot/intel-ucode.img
==> Starting build: '6.12.12-12-Q441'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [kms]
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas'
==> ERROR: module not found: 'usbhid'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-Q441-fallback.img'
==> WARNING: errors were encountered during the build. The image may not be complete.
error: command failed to execute correctly
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux-Q441
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-Q441.img
Found linux image: /boot/vmlinuz-linux-Q352WU
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-Q352WU.img
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux.img
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create new boot entries.
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
logger: socket /dev/log: Connection refused
Adding boot menu entry for UEFI Firmware Settings ...
done
[ll@ArchQ:Q352WU ~]$

這個Q441 安裝沒問題。
我製作新的Qdbug-6.12.126，config -> kernel -> install 安裝試試，看看能不能本機登入使用。
先移除不能使用的kernel Q441, Q396 ....，清出一些空間。

對了。Q441開機時，可能有時不成功，看網卡的橘黃燈是否有亮。
若沒亮，關電源後，再試一次。通常重開一至二次就會成功。
若一直一樣，那真的有問題，我也想不出原因。

1.Q441開機時，都不成功，看網卡是亮綠燈。
2.Q352WU、Qdbug-6.12.12開機時，都成功，看網卡亮橙黃燈。
3.Qdbug-6.12.12 ArchQ login：可以本機登入使用!後續如何使用?
4.不知有哪位先進跟我一樣是ASUS ROG B760-I 的板子，如果安裝Q441開機時，並成功連線，請告知!那表示是我的主機板子有問題要報修!

引用:

---

作者: cuhulong

3.Qdbug-6.12.12 ArchQ login：可以本機登入使用!後續如何使用?

---

麻煩再確認一個kernel ，Qrip-6.12.12，本機是無法登入，只能遠端登入，看它是否可用。
Qrip 與 Q441 的差異，只有工作頻率。
若Qrip 正常，試試 Q44-6.12.12，若Q44也不行，小弟猜想可能是BIOS 要調成 沒有鍵盤時，也能開機的狀態。
Boot (Menu) -> Boot configure -> Setup Mode -> Advenced Mode 調成這個試試，我不確定。

Qdbug 可以移除了，小弟只是用來判斷失敗的可能性。

1.Qrip-6.12.12，Q44-6.12.12，都不行無法遠端登入!看網卡是亮綠燈。
2.BIOS 要調成 沒有鍵盤時，也能開機的狀態--->不知如何設定?
3.Boot (Menu) -> Boot configure -> Setup Mode -> Advenced Mode 調成這個試試--->設定了!只是BIOS畫面是Advenced Mode!
附件 35046
找不到沒有鍵盤時，也能開機的狀態?

引用:

---

作者: cuhulong

2.BIOS 要調成 沒有鍵盤時，也能開機的狀態--->不知如何設定?

---

我也不知道，問AI 看看，先試試 鍵盤拔掉後，能不能開機進Q352WU。
若仍能正常開機，就要另查原因了，八成是BIOS 調整問題。
Q441, Q44, Qrip 等，都是無法在本機操作的版本，在你這裡都無法開機成功。

換去年的BIOS 試試。