LP研究社 (黑膠唱盤、黑膠唱片收藏分享)

[Leo Yeh]

http://phasemation.com/html_eng/prod...g_pp-1000.html

Y336,000

Phasemation has started from cartridge development as an original point. The fruits researched and know-how accumulated since P1 release 10 years ago have been compiled; thereby we have realized the middle/treble sounds with the extremely fresh sound quality and rich bass sounds which are woven to the perfect harmony. Here, we will release the flagship MC cartridge PP-1000 of new brand “Phasemation”, as a new product different from conventional cartridge series.


Redesigning the magnetic circuit

The magnetic circuit of P-1G has been reconsidered in full scale; as a result, the shapes of front yoke and pole piece have been redesigned. Therefore, the shapes well suited for efficiency and magnetic uniformity have been successfully realized. It has been realized that the output is increased without increasing the mass of vibration section.


Redesigning the body structure

The material of P-1 body has been reconsidered from the beginning in order to get the best balance of sound quality. The materials of base and body have been respectively changed to stainless material and duralumin. Furthermore, DLC (Diamond Like Carbon) *1) coating is conducted; thereby, the sound quality being well suited for the rigidity and vibration-damping properties and being also suitable to be a flagship has been realized.

*1DLC(Diamond Like Carbon)
DLC（Diamond Like Carbon）is a generic name of carbon film to be produced with vapor phase synthesis utilizing ion processing; and the high rigidity and high electric insulation similar to a diamond are provided for it.

Inheriting the high quality materials for audio sound

High quality materials for audio sound verified in P-1G and other models are inherited; and they are well-acknowledged until now for the following parts:
Cantilever made of pure boron material,
Magneto coil, pure iron coil, bobbin and wire damper made of 6N oxygen-free copper wire, and others.


Specifications
Power Generation Method Moving Coil Type
Impedance 4 Ohm
Applicable Stylus Force 1.7 to 2.0g
Output Voltage 0.29mV(horizontal direction of 1kHz 50mm/s)
Compliance 8.0X10(e-6)cm/dyne
Playing Frequency Range 10Hz to 30kHz
Separation 30dB or more (1kHz)
Channel Balance Within 1dB (1kHz）
Range of Recommended Temperature 20℃ to 26℃
Weight 14.3g
Stylus Chip Diamond(line contact / curvature 0.03×0.003mm)
Cantilever Pure Boron φ0.26
Magnet Samarium Cobalt Magnet　
Magnetic Circuit Composition Material Permendur
Base Stainless(Diamond Like Carbon processing)
Body Duralumin(Diamond Like Carbon processing)

[SGIREM463]

感謝! 不知道 Target 原來可以這樣用
LP 12 底板已經拿掉, 有聽說聲音會比較好

訂了 24 x 18 x 2.25 吋的楓木切菜板, 準備架在(可能用 Cerapuc) 四角柱子上, 再放上 LP 12. 空間大些可以放一些道具.
Target 四隻腳已經換成 Cerabase. 還在考慮要不要把 Target 灌沙. 有什麼建議嗎?

誠心建議，請將Target架的承板去掉。可將Linn12的底板也去掉直接在Target架的支撐架上面。這樣更能方便調整。而且聲音更能放開！Target架是尊為Linn12而設計製造。

[philcoyuen]

感謝! 不知道 Target 原來可以這樣用
LP 12 底板已經拿掉, 有聽說聲音會比較好

訂了 24 x 18 x 2.25 吋的楓木切菜板, 準備架在(可能用 Cerapuc) 四角柱子上, 再放上 LP 12. 空間大些可以放一些道具.
Target 四隻腳已經換成 Cerabase. 還在考慮要不要把 Target 灌沙. 有什麼建議嗎?

另外Linn12是不能用重的唱片壓。調整轉盤的水平尤為重要！Linn12直接承放在支架上就好了。簡單就是The Best！！！！！

[SGIREM463]

我相信 LP 12 會很好
這兩天換上 Expert Stylus 或 Sound Smith Rebuild 的 Linn Troika 看看

Lyra Argo 蠻好聽的. 據 Lyra 說, 像是個 Baby Titan.
剛買裝上後就一直沒拿下來.

Argo 和Skala相對的在細節和頻寬有很大的差距
相信同樣的唱頭LP12也能表現的很出色

[SGIREM463]

另外Linn12是不能用重的唱片壓。調整轉盤的水平尤為重要

這點有朋友頻頻告誡
還是不信邪
用了 300g 的 HRS Analog Disc, 約是 Platter + Sub-platter 的 10%, 或許不會有問題
轉動慣量影響更小
轉速正確

唱片下有 Ringmat

[kevintran]

感謝! 不知道 Target 原來可以這樣用
LP 12 底板已經拿掉, 有聽說聲音會比較好

訂了 24 x 18 x 2.25 吋的楓木切菜板, 準備架在(可能用 Cerapuc) 四角柱子上, 再放上 LP 12. 空間大些可以放一些道具.
Target 四隻腳已經換成 Cerabase. 還在考慮要不要把 Target 灌沙. 有什麼建議嗎?

正在想買幾塊maple木板來放器材。能不能請教一下您的菜板是那裡買的？:P

[SGIREM463]

Amazon

http://www.amazon.com/John-Boos-RA03...2943712&sr=8-1

一個 USD $85, 約 60 x 45 x 6 CM
maple 切菜板, 是木愧選擇紋路緊密的方向拼裝結合的, 強度可能比整片實木高.
這種大眾市場的東西實在是便宜
同樣規格的 Finite Elemente 或 BDR 可能要 USD $2000, 我覺得哪個好恐怕還很難說呢.

正在想買幾塊maple木板來放器材。能不能請教一下您的菜板是那裡買的？:P

[kevintran]

謝謝！因為最近想把擴大機放到離喇叭近一點的地上，又不想直接放在地上。本來想去Home Depot買幾塊木板自己黏成厚一點的。現在有現成的更好！
PS。會想到用楓木是看到這個 http://shop.mapleshadestore.com/Mapl...epartments/46/

[SGIREM463]

很多人說 Maple 聲音好. 應該錯不了.

謝謝！因為最近想把擴大機放到離喇叭近一點的地上，又不想直接放在地上。本來想去Home Depot買幾塊木板自己黏成厚一點的。現在有現成的更好！
PS。會想到用楓木是看到這個 http://shop.mapleshadestore.com/Mapl...epartments/46/

[Leo Yeh]

Benz-AMG

BENZ AMG Viella 12 “V12” turntable Precision engineering and classic design are embodied in the first turntable from Benz AMG (Analog Made in Germany), the Viella 12 or simply, V12. The Benz AMG turntable line was created by a group of audio industry experts to advance the art of vinyl playback Werner Roeschlau, designer and driving force behind Benz AMG, works with his son and other master machinists at their bespoke multi-story Bavarian factory located north of Munich. All machining is done in house, combining the latest Computer Aided Design and CNC machines with “classic analog” tools including custom lathes and drill presses. Their factory has been manufacturing some of the world's most highly regarded turntables for over a decade. This expertise in the design and manufacture of turntables led to the Benz AMG line, premiering with the Viella 12. Viella Turntable Plinth: CNC machined in house using 25mm aircraft grade aluminum 3 adjustable and retractable steel-copper spikes in aluminum feet Built-in spirit level Optional hardwood trim Viella Turntable Platter Bearing: Hardened 16mm axle bearing, CNC machined, ground and lapped Two sealed, hydro-dynamically lubricated radial bearings with axial bearings featuring static lubrication. Stainless steel sub-platter interfaces with 24.25 lbs (11Kg) platter Viella Turntable Platter: Decoupled spindle, 2 piece construction CNC machined in house using aircraft grade aluminum Weighted rim for enhanced flywheel effect 12.5 “ (318mm) diameter, 24.25 lbs (11Kg) weight Viella Turntable Platter Clamp: True reflex style, anodized aluminum, inverted threaded attachment to decoupled spindle Viella Turntable Tonearm Board: Detachable high mass tonearm board, pre-drilled for Benz-AMG and Graham tonearms Viella Turntable Motor: Lorenzi 2 pulse, low-speed brushless, precision 24v DC motor with auxiliary reluctance moment; sintered bronze bearings; cured and polished axis; and heavy flywheel. Motor housing acoustically decoupled from plinth via 5 rubber/metal mounts. 33.3, 45, and 78 speeds with electronic on/off, speed change, and speed fine adjust. Outboard Motor Power Supply with specific transformer for appropriate mains voltage and detachable IEC power cord Viella Turntable Belt Drive: Stainless steel weighted and polished drive-belt pulley. Precision made rubber belt. Viella 12” tonearm BEARING: Patented dual-pivot design (patent# 102007029039A1) also used in the rotor heads of helicopters. Horizontal axle with two 0.5mm thick “spring steel wires” replaces the standard gimbaled bearing, allowing fine azimuth adjustment while eliminating horizontal play. Vertical bearing is hardened tool steel, precision ground to a backlash-free fit with a needle roller bearing. It is extremely precise, maintenance free, and never requiring adjustment. ARMWAND: Aircraft quality, anodized aluminum tube for resonance control, 12 gram effective mass COUNTERWEIGHT: Two piece with Teflon decoupled sleeve COPPER INTERNAL WIRING: Multiple gauges of high quality copper MAGNETIC ANTI-SKATING: decoupled via a ring magnet and 2 bar magnets. Magnetic fields isolated in our patented bearing housing. VTA: precision locking system allowing easy adjustment during play. FULL WEB SITE COMING SOON

http://www.benz-amg.net/