Gyrotension VEGA Audio Vibration Isolator
http://www.highendcity.com/gyrotension-vega-audio-vibration-isolator/
[Features & spces]
-Floating type vibration isolator by radial symmetry silicone ring structure.
-Adjustable tension setting by the number of rings.
-Double vibration isolation design by silicone rings and 3-point support ceramic balls
-Radial symmetry ring design absorbs, diffuses and dissipates all kinds of vibrations more effectively.
-Precisely machined duralumin body and hard anodized top plate.
-The number of silicone ring layers: Small - 4 layers (48 rings), Large - 6 layers (72 rings)
-Height adjustment range: 20mm(0.79 inch).
-Size(Diameter*Height): Small - 60*40 mm(2.35*1.57 inch), Large - 79*47 mm(3.11*1.85 inch)
[Recommended load]
-Small: 12kg/each (36Kg (79 lbs) for 3-point supports)
-Large: 18Kg/each (54Kg (119 lbs) for 3-point supports)
[Ring tension / each]
Max: 500g (1.1 lb)
Recommended: 250g (0.55 lb)
[Recommended tension adjustment by applied loads]
(Assuming 3-point supports and large 6-layer ring Gyrotension.)
Under 9Kg: 1 layer
9 - 18Kg: 2 layers
18 - 27Kg: 3 layers
27 - 36Kg: 4 layers
36 - 45Kg: 5 layers
45 - 54Kg: 6 layers
*You can adjust the tension by the number of rings and arrangement.
Vibration in audio equipment is a serious problem that can't be ignored. If you remove it in any way you can improve
the sound more than you can imagine. It makes very firm, disctinct and deep bass level. Mid-range is very smooth
and detailed and no irritable and aggressiveness in high frequecy range. Clear, firm and wide sound stage mean that
it's getting close to the natural sound.
The Gyrotension Isolator is the ultimate resonance/vibration control device that employs the most precise and absolute
resonance/vibration absorbing, dissipating and eliminating function.
The Gyrotension Isolator is the most effective device for the vibration from the outside. One of them is "Ground-borne
vibration" and universally accepted as one of the major reason for the variability in the performance of audio equipment.
However tiny a vibration may seem to us, it will affect huge impact to the hi-fi audio signal processing systems.
You can set the optimum load by hooking the calculated number of rings. Recommended: 250g (0.55 lb)/each ring
3 Ceramic balls for 2nd vibration isolation.
You can adjust the height even under working load state by rotating the main body (written in 'VEGA').
Recommendations for the best support points.
Source players including CD Player
and Turntable.
[Recommending points]
Bottom part of
-CD transport
-Power supply
-Analog output
-Turntable Motor
-Turntable Spindle
Amplifiers
[Recommending points]
Bottom part of
-Main transformer or power supply
-Other 2 or 3 points for balancing
相信不少發燒友針對器材所產生的震盪，施加適當的避震手法，來增強重播時的效果，乃十分常見的調聲手法，而當中可謂各師各法，市場上更加衍生了 許多不同流派，以不同的避震理念，去解決器材所產生的震盪問題，從而提升或還原器材原有的實力，這次來自來自韓國的廠商，以獨特的浮動式懸空避震方式，設 計出趣味性極高的避震腳Gyrotension VEGA 浮動式懸空避震腳。
Gyrotension VEGA 稱為浮動型隔離器，主要透過採用了矽環作懸吊，這些有如橡筋一般的環，作為可以調節張力方式支撐著主體，而在底層則以陶瓷球作三點支撐，用戶只需將橡筋環 塞進一個硬鋁柱體，便能以懸吊方式支撐著一塊硬質陽極氧化的翅板，這塊板上面承著頂層的硬質氧化頂板，整體更提供了 20 毫米左右的高度調整，在設置上極具彈性。
Gyrotension VEGA 分別推出兩種不同大小的 2 個型號，較小型的由橡筋圈 4 層、 48 圈組成，而大型的型號則由 6 層與 72 圈懸吊方式組成，小型（ 4 層、 48 圈）能支撐高達 36 千克/ 79 磅，而大型的（ 6 層與 72 圈）承重能力則提升至 54 千克 / 119 磅，用家更可自行調節橡筋的數量及配置方式，來達至不同的調聲效果，玩法十分多元法。
產品特點及規格：
- 型懸空隔振器由徑向對稱矽膠圈結構
- 可調節張力的振鈴次數設置
- 雙隔振設計，陶瓷球以矽環以 3 點支撐
- 環形對稱式設計吸收，能擴散並更有效地去除各種振動
- 高精度及高密度鋁製主體與硬質氧化頂板
- 矽膠圈層數：小- 4 層（ 48 環），大- 6 層（ 72 圈）
- 高度調節範圍：20 毫米（ 0.79 英寸）
- 尺寸（直徑 x 高）：- 小 - 60*40 毫米( 2.35 * 1.57 英寸), 大 - 79 * 47 毫米 ( 3.11 * 1.85 inch)
原廠推薦負載設定：
- Under 9Kg : 1 layer
- 9 - 18Kg : 2 layers
- 18 - 27Kg : 3 layers
- 27 - 36Kg : 4 layers
- 36 - 45Kg : 5 layers
- 45 - 54Kg : 6 layers
用家可自行調節橡筋的數量及配置方式
相信不少發燒友，曾用過不少避震釘腳或絕緣體，但像 Gyrotension VEGA 一般，能透過自行調節橡筋圈的數量及設置方式，以達到不同的效果，相信十分罕見吧？光是這一點，相信已經值得愛好此道者關注。
回覆時引用此篇文章