顯示結果從 1 到 4 共計 4 條
  1. #1
    註冊日期
    2012-10-20
    文章
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    問題 求各位兄弟指点

    本人新到手一台Esoteric SA-50 CD/SACD,想使用其XLR平衡输出,通过按MODE进入菜单选择OUT>XLR时,出现XLR2\XLR3,不知道这两个XLR输出有什么区别?是输出电平大小不同还是其他?望各位不吝赐教,谢谢!

  2. #2
    註冊日期
    2008-02-03
    文章
    3,980
    Thanks
    835
    Thanked 766 Times in 585 Posts

    預設

    引用 作者: cf_tomcat 查看文章
    本人新到手一台Esoteric SA-50 CD/SACD,想使用其XLR平衡输出,通过按MODE进入菜单选择OUT>XLR时,出现XLR2\XLR3,不知道这两个XLR输出有什么区别?是输出电平大小不同还是其他?望各位不吝赐教,谢谢!
    XLR terminal pin assignment is user selectable between 2 pin hot or 3 pin hot
    玩了半輩子的音響 世間喧嘩 不如孤獨 寧靜 思想 深山幽谷中的一股清泉

  3. #3
    註冊日期
    2008-02-03
    文章
    3,980
    Thanks
    835
    Thanked 766 Times in 585 Posts

    預設

    High quality 2 channel dedicated analog audio output
    Precise imaging and deeper sound stage

    The analog audio output circuits are in a dual mono configuration producing excellent channel separation. 2 channel dedicated circuit design further enhances precise imaging, transparency, separation and depth of soundstage.

    RCA (single-ended), output or XLR (fully-balanced), output is selectable. The analog signal path that is not used can be completely de-activated. XLR terminal pin assignment is user selectable between 2 pin hot or 3 pin hot*.

    *The hot pin is fixed to 2 pin hot for dual (RCA + XLR), output mode.
    玩了半輩子的音響 世間喧嘩 不如孤獨 寧靜 思想 深山幽谷中的一股清泉

  4. The Following User Says Thank You to 999369 For This Useful Post:


  5. #4
    註冊日期
    2012-10-20
    文章
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    預設

    收到,谢谢各位老大的热心帮助!!

發文規則

  • 不可以發表新主題
  • 不可以發表回覆
  • 不可以上傳附件
  • 不可以編輯自己的文章
  •