有什麼方法來測相位或時間差呢?:^)
可列印查看
In phase and out of phase
使用示波器看波形
左右喇叭各輸入1kHz的訊號
in phase
http://www.ymec.com/hp/signal2/images/speaker04.gif
out of phase
有一邊接反了
http://www.ymec.com/hp/signal2/images/speaker05.gif
也可用RTA裡的correlation meter來看
若是in-phase,中間會有個正向peak
http://www.ymec.com/hp/signal2/images/speaker06.gif
若是out of phase
中間的peak會是負向的
http://www.ymec.com/hp/signal2/images/speaker07.gif
====================
這邊有in phase的1kHz訊號及out out phase的(兩個聲道的相位是相差180度)
若是in phase,定位應該在喇叭中間
若是out of phase,定位會非常不明確的靠向一邊,且音色會改變
http://www.ymec.com/hp/im/icon/wav_icon.gifIn phase(inphase.wav / 187KB)http://www.ymec.com/hp/im/icon/wav_icon.gifOut of phase(outphase.wav / 188KB)
http://www.ymec.com/hp/signal2/check02.htm
前面貼的是出自上面那本嗎?
有出版社嗎?
貼圖 1 #30 2 #34 是這本~~~~~~~~~~~
http://img529.imageshack.us/img529/1091/dsc04332y.jpg
#40貼圖 是這本~~~~~~~~~~~~
http://img10.imageshack.us/img10/2857/dsc04334t.jpg
謝謝啦,我是該多看看書.........
#41~~~~~~~~~~~~
http://img707.imageshack.us/img707/125/dsc04333k.jpg
Waves & Phase 增加在#41
http://img51.imageshack.us/img51/5924/dsc04337d.jpg