Mini 出貨在即....再來推一下
interface要用什麼呢?
FW or USB...:^)
可列印查看
esoteric 跟電腦接的話,只能用非firewire的?
除非是新的K-01、K-03
才有好的asychronous USB 24/192
esoteric的1394和電腦的1394無法通(D-05無法直接拿來接MAC)
esoteric 的1394和 weiss 的1394無法通(P-05...等無法拿來接WEISS)
weiss的1394和電腦的1394可以通
我想能通電腦的1394就不能通音響廠家(esoteric, pioneer, sony, denon....等)的1394
Mini出來一定要經過interface才能接D-05 or D-03
走1394就要用 Int 202
走USB可以用 m2tech evo(有clock in...(y))
Esoteric K-01, K-03雖有asychronos的USB但是不能播DVD-A(這方面需求不小)
yes...單用esoteric要用firewire就是複雜化了.....
走1394,apogee duet應該也可以
evo要年底了........
如果只是考慮1394跟USB的話,有1394接1394....除非有asychronous USB才去接USB......DVD-A的話只有同軸、光纖、HDMI可以輸出吧,如果是講CAS的話。
;(要這麼久....
弟的想法是這樣
CAS的部分
RIP用PC,可以針對RIP環境作最佳化
RIP到外接硬碟
Mini走1394接外接硬碟(如果資料增加,第二顆硬碟可以再用1394介面串接。JR可以支援管理多顆硬碟,可以硬碟一標為Library A放CD,硬碟二標為Library B放2496, 24192....)
Mini走USB送訊號到m2tech EVO
Evo到Esoteric D-05 再到前級 後級 喇叭....
Disc player部分
UX3-pi聽兩聲道SACD或CD
那就ilink 到 D-05(解兩聲道DSD)
到前級 後級 喇叭
UX3-pi如果聽多聲道SACD或DVD-A
那就ilink(需由D-05再串接過來....這點需要再確認是否可行) 到 Pioneer AX-10ai
AX10ai前兩聲道pre out到前級的bypass 到後級 到喇叭
複雜且冒險的作法,且若是有考量聲音表現的話.....
光Mac Mini 當CAS就有的玩了...
拍拍手........記得要來分享心得喔...cool
又過了四天...
話說D-05, D-07的內建音控素質不知如何...:^)
短時間之內Eosteric 不會出支援192的USB DA...
m2tech evo上市後,有機會和INT202上演一場USB VS FW 的PK嗎
買K-01與K-03是非常好的選擇...
產品臺灣上市的話PK應該不會有問題
hiFace Evo High-End USB to SPDIF Converter The M2Tech hiFace Evo by M2Tech is the new statement in high quality computer audio interfaces. Hosted in a compact and stylish aluminium case, hiFace Evo is capable of flawlessly transferring audio data up to 192kHz, 24 bits to virtually every DAC or A/V receiver around, thanks to its comprehensive outputs set.
http://www.m2tech-hiface.com.au/imag...m2tech-evo.png
The hiFace Evo incorporates the same leading edge technology as the classic hiFace – with some extras. Asynchronous operation up to 192kHz is used in conjunction with proprietary drivers which allow for Kernel Streaming, Direct Sound and WASAPI operation (the latter under Windows vista and 7). Windows and Mac drivers are already available, Linux drivers to come soon.
Very high precision, very low phase noise (jitter) crystal oscillators are used. To further improve their performance, they have a dedicated shunt voltage regulator which ensures a very low noise and spurious-free supply.
hiFace Evo is powered by an external power supply (not included), to avoid the dirty USB bus supply from negatively affecting hiFace Evo’s performance. Linear regulators are used all around, to allow all jitter-sensitive digital circuits to operate at their best.
Also, a low-pass filter is provided at supply input to further reduce any bad influence from the supply. hiFace Evo can be powered by an external wall adapter (9V 1A will fit), or with a 9V alkaline battery, or with a 7.2V/10.8V Lythium battery.
Several outputs are available at the same time: coax on RCA, coax on true 75 Ohms BNC, AES/EBU on male XLR, optical on Toslink™ (Toslink™ is guaranteed to operate up to 96kHz, though we got operation up to 176.4kHz on certain setups), optical on ST (for high-speed operation up to 192kHz and up to 1.6km or 1 mile), straight I2S for direct connection to DIY DACs on RJ-45 (NOT plug-in compatible with NorthStar products!).
All outputs, except straight I2S, are galvanically isolated (coax and AES/EBU via a pulse transformer). AES/EBU output can be set to professional or consumer mode by an internal jumper. In addition, an input for an external clock is available, for those who have a extremely precise and stable clock generator to be used with hiFace Evo.
hiFace evo automatically recognizes the presence of the clock on its input and switches on it whenever available. This input is also galvanically isolated via a pulse transformer. Three LEDs indicate power, external clock presence and incoming data from the PC. Connection to the PC is via a type B female USB connector.
Specifications
http://www.m2tech-hiface.com.au/index.php/hiface-evo
- Size: 105x46x104mm (w x h x d, case) 105x50x142mm (w x h x d, total)
- Weight: 380g
- Sampling frequencies (kHz): 44.1, 48, 88.2, 96, 176.4, 192
- Resolution (bits): 16 to 32
- Inputs: USB 2.0, supply, master clock
- Outputs: S/PDIF x2 (RCA & BNC), AES/EBU (XLR), optical Toslink™, optical ST
- I2S (RJ-45). Supply voltage: 7-11VDC (15VDC max.)
- Supply current: 140mA (idle, no output connected)
- Master clock input voltage: 3.3VPP
- I2S output voltage: LVCMOS (3.3V) with 25mA current capability on each line
其實我蠻好奇而且也蠻意外的INT 202竟然沒有Clock In...這在Minerva和DAC 202上都有的介面
這價位還要搞外接clock有點過頭,做好該有的功能比較重要
要接也是系統上的DAC有比較重要呀
另INT 202買遙控器有volume control也不錯啦
應該是INT 202 => DAC => 後級啦
一般DAC無音控
其實MY-HIEND
PK的考量絕對不是在商業角度
而是各方面的完整性
小站可擔當不起"錯殺忠良"這名詞....
這問題很複雜,不是大家想的這麼簡單的
1. 評論者的喜好
2. 器材的設定與搭配是否到最佳
3. 描述的一致性語言、客觀度主觀度區分力與成熟度
這方面的問題我會慢慢克服的
不過我自認比起其他商業性媒體
MY-HIEND已經非常努力也用心了
另外還有一個問題
就是若考量不夠完整
讓看文章的人誤解或斷章取義
這也是MY-HIEND背不起的罪名
小弟也有聽過幾台,也有幸比較過,覺得短暫的PK對於器材並不一定正確,尤其是新品的時候,還蠻贊成小葉大大的方式,評述聽感,要論名次就布一定正確了。華山論件也沒辦法評出1-5名阿
這可不是"名次"問題,而是沒有說哪個聽感是哪台.
假設兩台機器PK, 機器A, 機器B.
結果聽感報告出來了...
某一台: xxxxxx
另一台: xxxxxx
然後哪台是A哪台是B不能講.
這樣是哪種PK?
richard您說的我會不知道嗎?
原因還是我之前講的.........
有機會我們再聊
仔細看的話,的確是不難看出那台是那台
一直不想有個清楚的summary是因為我覺得本次測試雖然已經盡力去做到最好
但有些地方仍然沒達到我的標準
我不希望造成任何的誤會
不過這部份會慢慢進步的
MY-HIEND因為有許多堅持
資源比起其他...是少很多的
持續下去的原因是什麼,MY-HIEND的核心精神是什麼
答案是Passion...(熱情)
若那一天消失了,這站我想也就不在了
過程證明的是我們的努力與認真
但也因為有責任,所以就要更小心
正確的態度與觀念,是這裡要給大家一起努力的
若要簡單說
我們不夠成熟,這邊來看的人也不是都很成熟
在某些有責任的主題上,我們就必須要更小心、更為嚴謹!
責任不是只商業責任,是指資訊表達的正確性、被理解程度與品質。
站上很多大大的器材與空間都比我好上很多
問題是....他們也很忙,也不是很有空寫文章
集體試聽我覺得很不錯
但有很多改進空間
大家的想法很簡單
我可不能想的這麼簡單.....
大家"看的很簡單"
過程可是"一點也不簡單"
網路是一個公器, 是可以互相交換資訊的平台, 但也是有社會責任的 :| 這麼說也許很嚴重, 但確是我親身碰到的實際經驗 :( 有個頂級相機的網站, 因為版主的資料沒有備份, 網站在無預警的狀況之下, 關站六個月, 我和一群跟著網站成長的原始版友, 無處可以悽身聊天, 因此轉戰香港, 從此我就不在那網站上發表任何文章, 以免自己努力key in 的文字受到忽視, 對 .. 沒錯 也許在一些人眼中, 那些是微不足道的東西, 但確是自己一字一字的努力打下來的啊 , 我自己很珍惜這樣的經驗, 也以同理心看待網友的分享 :P:*
當看到器材pk的時候, 真的只要知道最後答案就好嗎 ? 那我也可以直接告訴您我喜歡的是那一台, 但是您真的會相信我的聽感或分析, 還是只要知道是那一台就好呢 ? |-) 我個人喜歡的器材是偏音樂性的, 音響性不那麼強烈的要求, 因為我自己的空間問題, 所以只希望能輕鬆的聽音樂, 發出原有錄音的水準, 讓我能輕鬆的鬆懈壓力 (blush)
這回到香港音響展參觀, 我聽到了我更喜歡的聲音與更合理C/P 值的產品, 讓我更能重新省思自己想要的東西 , 不一定是媒體上的推薦的強勢商品, 也許是個冷門的品牌, 但是合乎自己的需求與口袋深度的東西, 可能才真的是我們真正想要的啦 (blush)