hi ,小第看中了
densen b-330 and simaudio moon 330A 後級
兩部的出力也是240W /4Ω
有沒有用家可給些意見? thx
可列印查看
hi ,小第看中了
densen b-330 and simaudio moon 330A 後級
兩部的出力也是240W /4Ω
有沒有用家可給些意見? thx
Densen B-330 Plus +1
DENSEN B-330
POWER AMPLIFIER
http://densen.dk/images/top_b330.jpg
DESCRIPTION
The B-330 is a direct descendent from the top of the line B-350 monoblocks.
The B-350 monoblocks act as the internal reference at Densen.
Basically, the B-330 is a stereo power amp based on the B-350's technology, and uses the distinct monoblock cabinet with its recessed heatsinks as the basis for an extremely affordable reference power amplifier.
The B-330 contains several exciting features. Externally on the backpanel there is a switch to adjust the gain, so it either works perfect with a traditional preamp or with a CD with variable output.
There is also a D-Sub15 connector, allowing for Link connection to other Densen products, and for auto power on/off.
The D-Sub connector can be daisy-chained in multiroom systems.
B-330 is also prepared for the SAXO electronic crossover. This is done by mounting the crossover internally in the B-330 in a socket. The SAXO crossover will fit all passive speakers on the market.
SPECIFICATIONS
Power output in 8 ohms: 2 x 120W
Power output in 4 ohms: 240W
Power supply size: 750VA
Storage capacity: 110.000uF
THD + Noise @ rated output: Less than 0.1%
Weight/shippingweight: 15/17 Kg
Product dimensions (WxDxH): 440x310x64mm
MOON SERIES
330A Stereo Power Amplifier
http://www.simaudio.com/images/xlg_moon330A.jpg
Significant Design Features:
· 12 Volt Trigger input and output
· A "no overall feedback" design resulting in genuine real-time amplification, a more accurate
musical reproduction with respect to tonality, virtually non-existent intermodulation distortion
and the elimination of common phase errors resulting from feedback
· An oversized power supply
· Custom proprietary toroidal transformer design with lower magnetic, electrical and thermal
loss, yielding an improved power transfer and lower regulation factor. The result is increased
current speed and better dynamics
· Balanced differential circuitry
· Class A output to 5 watts for greater efficiency
· Proprietary MOON Bipolar output transistors with unprecedented gain linearity resulting in
improved bass response and even more accurate sonic reproduction
· A high damping factor yielding superior musical dynamics, improved signal speed and refined
timbre accuracy
· RS-232 port for (i) full unsolicited bidirectional feedback and (ii) firmware updates
· PCB w/ pure copper tracings & gold plating that yields low impedance characteristics
· Extremely rigid chassis construction to minimize the effects of external vibrations
· Accurate matching of the very finest high quality electronic components in a symmetrical
circuit design
· Designed to be powered up at all times for optimal performance
· Low operating temperature to ensure a longer than normal life expectancy.
MOON 330A Power Amplifier Specifications
Type Solid State Configuration Stereo Power Supply Transformer 400VA Power Supply Capacitance 85,000µF Class Of Operation A/AB Single-ended Input RCA - 1 pair Balanced Input XLR - 1 pair Input Device Type J-FETs Input Impedance 47,500 Ω Input Sensitivity 800mV RMS Output Device Type Bipolars - 4 per channel Output Binding Posts 5-way / Gold-plated / Shielded Output Power @ 8 Ω 125 Watts Output Power @ 4 Ω 250 Watts Output Power @ 2 Ω 325 Watts Output Power - Bridged Mono 400 Watts Frequency Response 10Hz - 125kHz (+0/-3dB) Output Impedance 0.02 Ω Damping Factor (static) 400 Gain 31dB Signal-to-noise Ratio > 100dB @ full power Maximum Output Voltage 40 Volts Slew Rate 42V/µs Maximum Current - Peak / Continuous 28 amperes / 13 amperes IMD Unmeasureable THD @ 1 watt / @ 125 watts (20Hz-20kHz) < 0.02 % / < 0.05 %
12 Volt Trigger Operation
Direct Logic (0V = off, 12V=on) using a
1/8" mini-jack with an input impedance of
1K Ω and current requirement of 12mA
Available Faceplate Finishes Black and Silver Power Consumption @ idle 36 Watts AC Power Requirements 120V / 60Hz 240V / 50Hz Fuse Replacement - 120V 6A long fast blow Fuse Replacement - 230V 3A long fast blow Shipping weight 33 lbs / 15 Kgs Dimensions (W x H x D) 16.9 x 3.5 x 14.0 in. (42.9 x 8.9 x 35.6 cm.)
Features & specifications are subject to change without notice.
DENSEN..聲底乾淨 透明度高........DENSEN B-330+1票;)